Can-Am Spyder Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
143 Posts
Discussion Starter #1
I am getting a vibration at about 5600 RPM, could that be the drive belt, and is it time to by a belt tentioner?
 

·
Super Moderators
Joined
·
2,781 Posts
some vibrations are caused by a harmonic from the belt (at least that's what BRP says)

some can be cured by the belt tensioner others can't

I have had a vibration between 47 MPH - 55 MPH or so since I got the bike

I put on the tensioner and it's still there, so the tensioner will fix some and it won't do anything for others
 

·
Registered
Joined
·
244 Posts
I get some harmonic vibration from the belt at certain loads and rpms and if I change the load/rpm with the throttle it will go away. Of course the Rotax has some vibration that will not go away. The vibration from the belt has not bothered me enough to get a smooth spyder roller or make my own.

JT
 
1 - 7 of 7 Posts
Top