Can-Am Spyder Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
My parking brake seems to be tough to engage on the slightest of incline/decline. I do have the "regular" brake engaged obviously since I'm on a slope. Is there a trick to doing this or some tweaking I can do? Thanks.
 

· Registered
Joined
·
1,031 Posts
I have trouble disengaging mine... wish I could help; I'm going to hang out and watch for any answers.
 

· Premium Member
Joined
·
3,861 Posts
Having just changed my rear brake pads to Gen 3s, I can tell you that the parking brake is adjustable... Take a peek under and behind the muffler and you'll see the rear brake caliper. That drum with the cable wrapping around it is the parking brake. follow that cable up over the top and toward the front of the bike a little bit and you'll see where there's a threaded adjustment for it... Make small changes and note what you did so that you can un-do it if necessary! :cool:



 

· Registered
Joined
·
40 Posts
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top