Joined
·
60 Posts
OK I went to Tractor supply and purchased 1.5' of 10" wide baler belt for 7.99 p/ft. I asked the clerk if he could cut a little larger than 1' and he gave me 16" for the price if 12".
I mounted it to the fender using some SS 1/4" flat head bolts with trim rings from Lowes, backed by SS fender washers & SS nuts.
I used the license plate bottom holes as a guide for drilling the holes and turned the flap the oposite way as it was rolled so it is away from the tire farther.
Total cost about $15.00 and it can be trimmed to any shape you like.
C-YA RL
I mounted it to the fender using some SS 1/4" flat head bolts with trim rings from Lowes, backed by SS fender washers & SS nuts.
I used the license plate bottom holes as a guide for drilling the holes and turned the flap the oposite way as it was rolled so it is away from the tire farther.
Total cost about $15.00 and it can be trimmed to any shape you like.
C-YA RL
Attachments
-
62.5 KB Views: 113
-
59.4 KB Views: 113
-
41.6 KB Views: 104
-
50.4 KB Views: 101