[dsrtlawman]

I added the Slingmods LED driving light bar to my 2022 Spyder RT Limited but now get radio interference whenever I turn on the bar. Anyone know how I can fix this?

 

[Bert Remington]

Step 1 -- call Slingmods Tech Help. They will want to know if you added any other accessories and how closely you followed their instructions.

Step 2 -- add ferrite chokes in the power circuit. Take at least one extra turn of the wires through the choke.

Step 3 -- add a capacitive-inductive filter in the power circuit. Good ones start at $15.

 

[Easy Rider]

Step 1 -- call Slingmods Tech Help. They will want to know if you added any other accessories and how closely you followed their instructions.

Step 2 -- add ferrite chokes in the power circuit. Take at least one extra turn of the wires through the choke.

Step 3 -- add a capacitive-inductive filter in the power circuit. Good ones start at $15.

Good suggestions but...........
The stray RF might be radiating from the LEDs themselves, out into the air.
This is a known problem with some designs of LED lights.

The only solution might be a different brand of lights.

 

[dsrtlawman]

Good suggestions but...........
The stray RF might be radiating from the LEDs themselves, out into the air.
This is a known problem with some designs of LED lights.

The only solution might be a different brand of lights.

This is what slingmods told me when I asked them about a fix for the interference. Wish I knew that before the purchase and install.