Can-Am Spyder Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 · (Edited)
Here are some torque settings

2008-2009 GS SM5- SE5

oil tank - 15ft lb
oil filter - 97 in lb
engine oil plug - 124 in lb
Axel - 96 ft lb
Spanner nut - 15 ft lb
Brake disc screws - 18 ft lb
Encoder wheel screws - 44 in lb
lugnuts - 77 ft lb
Main Head Bolts - 15 lbf-ft then 44 lbf-ft (Criss-cross sequence)
Small Head Bolts - 89 in-lbs
Cam Sprocket Bolt - 22 ft-lbs (Loctite)
Cam Retainer Bolt -89 in-lbs
Cam Tensioner Bolts - 53 in-lbs (Loctite)
Crank Sensor Bolt - 89 in-lbs
Valve Cover Bolts - 62 in-lbs
Stock Primary is 74 lb.ft.
Stock Secondary is 44 lb.ft
STM Primary is 60 lb.ft
STM Secondary is 30 lb.ft

Valves (Stock Cams) - .002 intake and .004 exhaust
Valves (MrRPM Gen1 and Gen2) - .016 intake and exhaust
Piston Height MrRPM BBKs- .013 to .020

Brake Calipers- 34 lb.ft

I will be adding to these as I need them
 
1 - 2 of 2 Posts
Top