Can-Am Spyder Forums banner

Cruise Control for Spyder

31316 Views 14 Replies 12 Participants Last post by  Miguel
Does anyone have any experience with motorcycle cruise controls in general and ones that will work with the Spyder in particular.

The way I ride my bike it seems like this would be a nice feature if you are going to go any distance at all. I see a few mechanical drag ones that look like they might work for my purposes. There are some electronic (real) cruise controls but these require getting into the engine controls and I am not ready for that.

Any help would be appreciated.

Bob
1 - 2 of 15 Posts
A few options

Here are a few options:

I have friends that have used the friction type. They are simple, but the downside is they do not maintain speed... you speed up going down hills, and slow down going up hills.

I had electronic cruise on my last Honda Goldwing, it was very nice... worked like my cars cruise.

It might be worth contacting these folks to see if they can do something for Can Am Spyder diameter grips/handle bars. My experience is a lot of these type people will work with owners of new "cycles" to develop their products.

http://www.accessoryinternational.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=AI&Product_Code=TR074041


Here is a link showing all the components of the above friction type cruise control:
http://www.accessoryinternational.com/cruisecontrol.htm
It says it fits 7/8" to 1" handle bars.


This site has many interesting options: http://www.mccruise.com

Note they manufacture a unit for Can-Am four Wheelers: http://www.mccruise.com/Bombardier-Traxter--Traxter-XL-Speed--Spray-Control-p-4.html
See less See more
1 - 2 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top