Can-Am Spyder Forums banner

cool Free safety light Mod

2254 Views 1 Reply 2 Participants Last post by  powerbyaj
Remove the Stock license plate light reflector turn it upside down, clamp it in a drill press vice with a rag around it to keep it from scratching it,,use a 1" hole saw with out the center drill bit,,,Drill two holes inside on the right and left sides (Bottom) ,,,only drill through the black plastic not through the red lense (don't drill through the mounting screw area,,, remount the light and test

cool mod........
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.