Can-Am Spyder Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Remove the Stock license plate light reflector turn it upside down, clamp it in a drill press vice with a rag around it to keep it from scratching it,,use a 1" hole saw with out the center drill bit,,,Drill two holes inside on the right and left sides (Bottom) ,,,only drill through the black plastic not through the red lense (don't drill through the mounting screw area,,, remount the light and test

cool mod........
 

·
Registered
Joined
·
47 Posts
Got Pictures

Remove the Stock license plate light reflector turn it upside down, clamp it in a drill press vice with a rag around it to keep it from scratching it,,use a 1" hole saw with out the center drill bit,,,Drill two holes inside on the right and left sides (Bottom) ,,,only drill through the black plastic not through the red lense (don't drill through the mounting screw area,,, remount the light and test

cool mod........
Got Pictures.
 
1 - 2 of 2 Posts
Top