Can-Am Spyder Forums banner
1 - 1 of 1 Posts

·
Super Moderator
'17 RT Limited
Joined
·
1,482 Posts
The CB was connected to the bike’s 12v outlet and the SR10 was connected to the new 12v outlet harness (again ground wires not connected). - - WOW!! CB worked perfectly with no squeal.

Don’t asked me why this worked because I just don’t know.
You might just be fooling yourself here.
Take the batteries OUT of the SR10 and see if it still works.
With no power ground connected, you probably are running off of the internal batteries.
 
1 - 1 of 1 Posts
Top