Can-Am Spyder Forums banner
1 - 5 of 5 Posts

·
Super Moderators
Joined
·
2,781 Posts
Yes they are options you can buy..
I think the light is a Burp option and the other you can but at a few places, but could not tell you where, but I'm sure others have some addies handy

but why bother with a light? not big enought to lose anything in, or just use a small flashlight
 

·
Premium Member
Joined
·
103 Posts
For lighting, i used L E D strip lighting. Works great, lots of light, since it draws so little power, i have it switched off the key power, so its on whenever the key is on. I have a 16 inch strip stuck to the top back. You can buy 16 foot strip that you can cut and use in what ever lengths you want. You just solder on wires, where u cut it. Check ebay, for L E D lighting. I am able to buy a 16 ft roll for 20.00 including shipping from china. Takes 9 days to receive.
 

Attachments

·
Premium Member
Joined
·
103 Posts
This is what I installed for my truck release. Mine is an RS, but it should work for an RT.

[ame=http://www.youtube.com/watch?v=KgbK9dyc2fI]TricLed.com automatic trunk release for the Can Am Spyder - YouTube[/ame]
 
1 - 5 of 5 Posts
Top