2007 Can-Am Spyder Specification - Can-Am Spyder Forums: The Y-factor Community
 
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 06-29-2007, 09:08 PM Thread Starter
Senior Member
 
Join Date: Jun 2007
Location: Arkadelphia, AR
Posts: 891
2007 Can-Am Spyder Specification

Engine:
Manufacturer: BRP-Rotax
Type: 990 V-Twin
Displacement: 60.90 cubic inches (998cc)
Bore: 3.82 in (97mm)
Stroke: 2.68 in (68mm)
Cylinder: 2
Valves per cylinder: DOHC 4
Max Output: 106 [email protected] rpm ([email protected] rpm)
Max Torque: 77 lb-ft @6250 rpm (104.3 [email protected] rpm)
Compressino Ratio: 10.8:1
Ignition Type: Electronic ignition with dual output coil
Lubrication: 5W40 BRP synthetic oil
Exhaust System: 2-into-1 with catalytic converters
Cooling: Liquid cooled
Injection: Multi-point EFI with 57 mm diameter throttle bodies

Drive Train
Gear Box: Sequential Manual 5-Speed (SM5) with transmission- based reverse
Optional Gear Box: Sequential Electronic 5-Speed (SE5) with transmission- based reverse (note: not available until approximately February 2008)
Final Drive: 28/79 ratio final drive with Carbon-reinforced drive belt
Clutch: Wet, multi-plate, manual operation through a hydraulic piston

Electric Equipment:
Magneto: 500 Watt
Starter: Electric
Battery: Dry Cell, 12V, 21 Amp

Geometry:
Front suspension: Double A-Arm with anti-roll bar
Front suspension travel: 5.67 in (144 mm) with adjustable cam
Rear suspension: Swing-arm with monoshock
Rear suspension travel: 5.71 in (145 mm) with adjustable cam
Chassis type: SST Spyder (Surrounding Spar Technology)
Steering: DPS (Dynamic Power Steering)

Tires & Wheels (Kenda-http://www.kendausa.com/)
Front Tire: KR21 165/65R14
Front nominal pressure: 13-17 psi (89-117 kPa)
Rear tire: KR21 225/50R15
Rear nominal pressure: 13-17 psi (89-117 kPa)
Wheel size, front: Aluminum 14x5 (355x127)
Wheel size, rear: Aluminum 15x7 (381x178)

Brakes
Type: Foot-actuated, fully integrated hydraulic braking system
Front braking system: 4 piston calipers with 10.2 in x 0.25 in (260 mm x 6 mm) discs
Rear braking system: single piston caliper with 10.2 in x 0.25 in (260 mm x 6 mm) discs
EBD: Electronic Brake Distribution
ABS: Anti-lock Braking System
Parking brake: Mechnical, foot actuated to the rear caliper

Safety & Security
VSS: Vehicle Stability System
ABS: Anti-lock Braking System
TCS: Traction Control System
SCS: Stability Control System with Roll-Over Mitigation
DPS: Dynamic Power Steering
DESS: Digitally Encoded Security System

Vehicle Dimensions & Weights
Dry vehicle weight: 697 lbs (316 kg)
Front storage capacity: 2,685 cubic inches (44 L)
Front maximum load capacity: 30 lb's (15.9 kg)
Total vehicle load allowed: 440 lbs (200 kg)
Fuel capacity: 7.13 US gal (27 L)
Oil capacity: 1.19 US gal (4.5 L)
Coolant capacity: 0.85 US gal (3.2 L)
GVWR: 1,188 lbs (540 kg)
Ground clearance: 4.5 in (115 mm)
Vehicle overall height: 45.1 in (1,145 mm)
Vehicle overall length: 105 in (2,667 mm)
Vehicle overall width: 59.3 in (1,506 mm)
Seat (top) height: 29 in (737 mm)
Wheel base: 68 in (1,727 mm)
Wheel track, front: 51.5 in, (1,308 mm)
Type of gas: Unleaded, 87 octane minimum

Features & Main Options
Color choices: Full Moon (silver), Millenium Yellow
Instrumentation: Dual analog and LCD w/speedometer, tachometer, electric fuel gauge, daily trip (A & B) meters, engine temperature, ambient temperature and gear position indicator. Information displayed in either metric or US Standards.
Main Options: Fog lights, xenon headlights, mono-seat cover, racing exhaust pipe, travel bags, cargo liner, passenger back rest, low and high windshields
Warranty: 2 years
Spyderman is offline  
Sponsored Links
Advertisement
 
post #2 of 2 (permalink) Old 05-29-2015, 02:54 PM
Junior Member
 
Join Date: May 2015
Location: Dundee ny
Posts: 2
I have one
spyder camp is offline  
Sponsored Links
Advertisement
 
 

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Can-Am Spyder Forums: The Y-factor Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome