was in the shop gettin service done and got bored to start to look through the accessories catalogue and found this
5 - LED Front Accent Lighting Kit. Says it is standard on RT-S and RT Ltd Models. The above it is the HID system, which I got, it says there the Accent Lights are an option. I went hmmmmm.. and talked to the parts guy guy and he did not know either, so I went home and took a look at my old Halogen lights and saw a small panel in the rear with wires sticking out, so went hmmmm again and so proceeded to take the front off the bike and take a look at the back of the HID's and found the same panel with no wires sticking out so added 2+2 and got 22 so swapped each panel and found the plug for the original lights and went WOO HOO !!!!!!! have 2 more accent lights at the front of the bike now
they are not any where nears as bright as the HID's but they look kewl.
those accent lights are $185.00 so saved myself a ton of cash
__________________
2011 RT Ltd with all factory options, ISCI floorboards/cruiser boards and LED nut with custom Halo kit and custom Fusion power plant, 50 SPF sunblock and cheap sunglasses
Always happy to see things work out for the best!! Got before and after pics?
__________________
CONSUMER WARNING: Use of this Spyder may cause smiling, happiness, urge to ride, excessive wind in the face, desire to call in sick to work, or even extended vacations. Some riders have experienced double-takes, pointing, sudden camera flash, kids waving, and conversations with total strangers. Several instances of unplanned roadside visits with police officers have been reported, though are not common. If you experience any of these symptoms, contact your Spyder forum to discuss.
i posted a vid here earlier with some shots from the front, but HID's look the same more or less but will take a couple of pics with the accent lights in tonite
__________________
2011 RT Ltd with all factory options, ISCI floorboards/cruiser boards and LED nut with custom Halo kit and custom Fusion power plant, 50 SPF sunblock and cheap sunglasses
ok picture 1 is my old headlight (halogen) bucket, you will notice a small reflector on the left side, this used to be in the HID buckets instead of the LED's in the rest of the pics
There is the same reflector in the fog light housings so I wonder if the same LED's can be fit in there, so need to find out out to take them out to look, then IF they will fit if there is a connector to hook them up to. Or maybe have to run wires to the other set.
I think that would look even better especailly in the dark. that video is still in the works, but I want to finish all the lights before I do that, so hopefully in the next month or so.. one set of new lights in the mail now, the other 2 sets are being worked on now..
__________________
2011 RT Ltd with all factory options, ISCI floorboards/cruiser boards and LED nut with custom Halo kit and custom Fusion power plant, 50 SPF sunblock and cheap sunglasses
Those little round suckers were standard on the RTS models last year, but I had the dealer install them in my A&C. You added the HID system and they weren't set up for them? Hmmm...
They are a cool little addition to the light package!
__________________
2010 Blue RT Audio & Convenience model Se-5 transmision. Dealer-added foglights, accent LEDs and extra speakers. Some RTS chrome windshield, front spoiler and top trunk trim, RTS frunklight and frunk liner, Top Trunk liner, Chrome lower air deflector, fendertip LED bulbs and ISCI floorboards added by yours truly...
yeah for some stupid reason they DONT come with the factory HID set up and are a $185.00 option
so all I did was take the ones from my factory halogen boxes and put them in the HID boxes.. took about an hour I guess
I want to see if the reflector/s in the fog lights are the same and if they are I want to either add a set of white ones or if the guy at tricled.com can figure it out I want to add a set of yellow ones so have white AND yellow fog lights
who ever thought that white lights in the fog work has to have his head examined
sheesh
__________________
2011 RT Ltd with all factory options, ISCI floorboards/cruiser boards and LED nut with custom Halo kit and custom Fusion power plant, 50 SPF sunblock and cheap sunglasses
Good thinking about the foglight housing! Unfortunately they aren't the same. I think that the folks from TricLed were looking at a way to put something in there, but I never heard of any concrete results.
__________________
2010 Blue RT Audio & Convenience model Se-5 transmision. Dealer-added foglights, accent LEDs and extra speakers. Some RTS chrome windshield, front spoiler and top trunk trim, RTS frunklight and frunk liner, Top Trunk liner, Chrome lower air deflector, fendertip LED bulbs and ISCI floorboards added by yours truly...
yeah I know.. he never knew about the accent light
now he does as we have been in contact for a while now
so he is going to look into it
but are you sure the fog light reflector is not the same as the accent light/s?
cause I want yellow in there if he can make it work.. hehe
__________________
2011 RT Ltd with all factory options, ISCI floorboards/cruiser boards and LED nut with custom Halo kit and custom Fusion power plant, 50 SPF sunblock and cheap sunglasses
You know something; When I was rding ATVs I had a Yamaha Grizzly 660. I made a lot of friends on a forum site (Grizzlyowners.com)
My signature there was: "Can't leave well enough alone".
You, my friend, have taken this thought to a whole new level!
__________________
2010 Blue RT Audio & Convenience model Se-5 transmision. Dealer-added foglights, accent LEDs and extra speakers. Some RTS chrome windshield, front spoiler and top trunk trim, RTS frunklight and frunk liner, Top Trunk liner, Chrome lower air deflector, fendertip LED bulbs and ISCI floorboards added by yours truly...