Well I took off my Corbin armrests today to see how hard they would be to take off once we got to Calif. in the spring to have the seat done
holy cow !!!!! took about 1.5 hrs they are held on by 2 small bolts BUT you have to take the entire pod/s apart to get to those 2 goofy bolts.
so I left them off and will get them recovered up here.
I also found out how to take the passenger backrest off. 3 bolts and the sat radio antenna and it's off so that will get done there also
__________________
2011 RT Ltd with all factory options, ISCI floorboards/cruiser boards and LED nut with custom Halo kit and custom Fusion power plant, 50 SPF sunblock and cheap sunglasses
Sometimes what can appear to be the simplist of projects can bite you in the least anticipated places...
__________________
2010 Blue RT Audio & Convenience model Se-5 transmision. Dealer-added foglights, accent LEDs and extra speakers. Some RTS chrome windshield, front spoiler and top trunk trim, RTS frunklight and frunk liner, Top Trunk liner, Chrome lower air deflector, fendertip LED bulbs and ISCI floorboards added by yours truly...
but at least i found out there was no way they were going to be able to do them down south, and i found out how to take the back rest off..
so now just need to take 'em in to where i am getting them done and try to remember how to put everything back properly when i get them back.. hopefully early in jan
__________________
2011 RT Ltd with all factory options, ISCI floorboards/cruiser boards and LED nut with custom Halo kit and custom Fusion power plant, 50 SPF sunblock and cheap sunglasses
You DID take pictures of the disassembly process; didn't you??
__________________
2010 Blue RT Audio & Convenience model Se-5 transmision. Dealer-added foglights, accent LEDs and extra speakers. Some RTS chrome windshield, front spoiler and top trunk trim, RTS frunklight and frunk liner, Top Trunk liner, Chrome lower air deflector, fendertip LED bulbs and ISCI floorboards added by yours truly...
other that screws/bolts the hardest thing to remove was the white pod cover.. after a few minutes of cursing and finally taking off the antennas it popped off,, hope it goes back on the same way
__________________
2011 RT Ltd with all factory options, ISCI floorboards/cruiser boards and LED nut with custom Halo kit and custom Fusion power plant, 50 SPF sunblock and cheap sunglasses
I sell insurance for a living...
The more documentation you have and evidence of what once was; the easier it is to put "Humpty Dumpty" back together again!
At least write something down!!
__________________
2010 Blue RT Audio & Convenience model Se-5 transmision. Dealer-added foglights, accent LEDs and extra speakers. Some RTS chrome windshield, front spoiler and top trunk trim, RTS frunklight and frunk liner, Top Trunk liner, Chrome lower air deflector, fendertip LED bulbs and ISCI floorboards added by yours truly...
what I am going to do is when I go to put everything back together i will take step by step pics so if anyone needs to to it then they just have to start at the end and work their way backwards..
I took them in today and should heve them back around the middle of Jan
I hope so as there is a slim possiblity that the bike may go into the Vancouver International bike show in mid Jan
__________________
2011 RT Ltd with all factory options, ISCI floorboards/cruiser boards and LED nut with custom Halo kit and custom Fusion power plant, 50 SPF sunblock and cheap sunglasses
Arm Rests
Linear Mode
